Check the fit range before anything else
Vegan Velvet Cuffs come in one size and fit wrists and ankles between 8" and 12.5". Measure the wrist or ankle you plan to cuff, then compare that number to the range. If your measurement falls outside it, these cuffs are not the right match, and no amount of adjusting the buckle will change that.
The buckle lets you tighten or loosen within that range, so aim for a snug hold that does not pinch. Because the cuffs are handmade in California from all vegan products, small variations are part of the construction, but the listed fit range is the number to plan around.
What the listing confirms about these cuffs
- Vegan Velvet Cuffs: One size fits wrists and ankles between 8" and 12.5". This is the single most important check before you buy or wear them.

Vegan Velvet Cuffs - Vegan Velvet Cuffs: Two layers of super-soft velvet sit against the skin, with a thinner top layer holding the D-ring and buckle. Explains why the cuffs feel soft while the attachment points stay reinforced.
- Vegan Velvet Cuffs: The D-ring and buckle attachment is reinforced with six sturdy rivets in shiny silver metal. Tells you where to inspect for wear and which parts to keep dry.
- Vegan Velvet Cuffs: These cuffs are NOT nickel free. A nickel sensitivity is a reason to choose a different cuff or keep metal off bare skin.
A simple wear sequence
- Measure and match: Confirm the wrist or ankle is between 8" and 12.5" before fastening anything.
- Position the velvet: The soft velvet side goes against the skin; the thinner top layer and metal hardware face outward.
- Fasten the buckle: Close the buckle so the cuff stays put without pressing into the skin. Check that the D-ring sits where you want it.
- Do a comfort check: Flex the hand or foot, then check for pinching or rubbing at the buckle and rivets. Adjust before play continues.
- Remove and inspect: After each session, look over the six rivets and the buckle for looseness or sharp edges before storing.
Nickel sensitivity is the one safety point the listing flags
The listing states plainly that these cuffs are not nickel free. The rivets and buckle are shiny silver metal, so if you know you react to nickel, treat that as a real limitation rather than a small detail. Choose a cuff with confirmed nickel-free hardware, or keep the metal from resting directly on sensitive skin for long periods.
The velvet covers most of the cuff, but the buckle and rivets are exposed by design. That is also why the attachment is sturdy: six rivets hold the D-ring and buckle in place. Check them before each use, and stop using the cuffs if a rivet feels loose or a metal edge catches on fabric or skin.
Caring for velvet and metal together
- Keep the velvet dry: The listing does not supply a washing method, so do not assume the cuffs are machine washable. Spot-clean gently and let them air dry rather than soaking the rivets and buckle.
- Wipe the hardware: A dry or barely damp cloth on the buckle and rivets removes residue without pushing moisture into the velvet layers.
- Store flat and separate: Keep the cuffs away from other metal hardware that could snag the velvet, and avoid crushing the soft layers.
- Inspect the rivets: The six rivets are the load-bearing connection for the D-ring. A quick check each time you put the cuffs on is the simplest habit.
Choosing between black, purple, and red
Color is the one option the listing actually settles: these cuffs come in black, purple, and red. The choice is cosmetic, so pick the one you will actually reach for. Black hides minor marks on velvet best, while purple and red show contrast against the silver rivets and buckle.
If you are buying your first pair of vegan bondage cuffs, start with the color you are most likely to wear often, then focus your attention on the fit range and the nickel warning. Those two details matter far more than the shade.

