Start with the backing, not the iron
The Smash Patriarchy Patch is a sew-on patch, not an iron-on one. That single fact changes your whole approach: you will need a needle and thread, not a hot iron. The patch measures approximately 3" x 3" and is made of raw cut fabric printed with black ink. Because the edges are raw, they can fray slightly with handling, so plan your stitching with that in mind.
If you searched for how to iron on embroidered patch, the technique does not apply here. The supplied product information lists the attachment method as sew-on and does not confirm any fusible backing. Treat sewing as the intended method and skip the iron.
What the catalog confirms about this patch
- Smash Patriarchy Patch: Patches are approximately 3" x 3" and are sew-on. Size and attachment method determine your needle, thread, and placement before you begin.

Smash Patriarchy Patch - Smash Patriarchy Patch: Black ink printed on raw cut fabric. Raw cut edges can fray, so secure stitching around the border matters more than with sealed-edge patches.
- Smash Patriarchy Patch: Colors will be mixed depending on our inventory. You may not receive a specific colorway; plan your project around the patch you receive rather than a exact shade.
- Smash Patriarchy Patch: If you have a color request, please let us know in the notes of your order, and we will do our best to accommodate. A note at checkout is the only stated way to request a color; it is a request, not a guarantee.
How to sew on the Smash Patriarchy Patch
These steps assume a fabric item such as a denim jacket, canvas bag, or cotton shirt. The patch is sew-on, so the goal is a secure border stitch that keeps the raw edges from lifting.
- 1. Place and pin: Position the patch on your garment and pin it flat. Check that the patch lies smooth and the corners are not curled before you thread a needle.
- 2. Choose thread and needle: Use a needle that can pass through your garment fabric and a thread color that works with the patch border. The supplied information does not specify a thread type, so match what you normally use for the garment.
- 3. Stitch around the edge: Sew a running or whip stitch close to the raw edge, working around the perimeter. Keep stitches small and even to hold the fabric edge and reduce fraying.
- 4. Secure and finish: Knot the thread on the inside of the garment and trim. Give the patch a gentle tug to confirm it is anchored before wearing or washing.
What to do about the raw edges
Raw cut fabric is part of the patch's look, but it is also the part most likely to fray. The catalog does not supply a fray-check product or a sealing method, so do not assume a specific treatment is approved. The safest supported approach is a close, even stitch around the border, which physically captures the edge.
If you want extra security, you can add a second row of stitching just inside the first. This is a general sewing technique, not a manufacturer instruction, so test it on a scrap first if you are unsure.
Patch care instructions that protect the print and the stitching
The supplied record does not include a full wash-care procedure. These are conservative care habits for a printed fabric patch on a garment, not a manufacturer's wash label.
- Turn the garment inside out: Washing inside out reduces abrasion against the printed face of the patch.
- Use a gentle cycle and cool water: Harsh agitation can loosen stitches and roughen raw edges. A mesh laundry bag adds another layer of protection.
- Skip the dryer if you can: Air-drying avoids heat and tumbling that can stress both the print and the stitching. If you must machine dry, use low heat.
- Check the stitching after washing: Look for loose threads or lifted edges and repair them promptly before the patch peels further.
Color, quantity, and honest trade-offs
The Smash Patriarchy Patch is listed at USD 3.15, with a catalog comparison price of USD 5.00. Colors are mixed depending on inventory, and a color request can be added in the order notes but is not guaranteed. That is a real trade-off: you may get a different background or thread color than you pictured.
The patch is also small at approximately 3" x 3", so it suits a pocket, collar, or bag panel rather than a large back patch. And because it is sew-on, it takes more time than an iron-on patch. If you want a quick peel-and-stick project, this is not that product. If you want a patch that stays put through wear, the sewing step is the point.
A note on the message
The patch reads "If I Had a Hammer, I'd Smash Patriarchy." The catalog text frames feminism around equality and cites women earning 77% of what men do for the same work. That context is part of the product, but it does not change the practical steps above: sew it on securely, care for the fabric, and expect color variation.

